3DJAKE ecoPLA White, 1.75 mm / 1000 g
Allround PLA filament at an unbeatable price in white colour
£17.45
(£17.45 / kg, Price shown includes 20% VAT. - Excludes delivery costs)
Features & Advantages
- Made in EU
- High quality
- Easy to print
- Minimal warping
- No heating bed required
Item no.: CLF-ECOPLA-WHITE-1000-175, Content: 1.000 g, EAN: 9120043486171
Product information & technical details
- Item no.: CLF-ECOPLA-WHITE-1000-175
- Manufacturer No.: ECOPLA-WHITE-1000-175
- Manufacturers: 3DJAKE
- Content: 1.000 g
- Diameter: 1,75 mm, 2,85 mm
- Product Line: ecoPLA
- Product types: PLA Filaments
- Filament colour: White
- Compatibility: Bambu Lab AMS*
- RAL colour: RAL 9003
- Net weight: 1000 g, 2300 g, 4000 g, 8000 g
- Recommended processing temperature: 195 - 215 °C
- Recommended heating temperature: 0 - 60 °C
Description
The ecoPLA has been slightly modified to make it perfect for 3D printing.
PLA (polylactic acid) is a non-toxic biodegradable 3D printing material.
3DJake ecoPLA is the cheap & high-quality alternative for many printers.
PLA is one of the most popular 3D printing materials due to its features, good printability and ease of use.
3DJake ecoPLA properties:
- Minimal shrinkage
- Low warping
- Good diameters &circularity tolerance
- Zero unpleasant odours
- Easy to print
- Tougher & less brittle than conventional PLA filaments
3DJake ecoPLA filament can be used with nearly all FDM 3D printers.
All ecoPLA colours are based on the standardized RAL colour system:
EcoPLA white - RAL9003
Dimensions of Filament Spools
Downloads
Product videos:
Questions & Answers about 3DJAKE ecoPLA White
-
I've been trying this in my Bambulab P1S and it overextrudes a fair bit to the point it sometimes starts blobbing. Could you folks help by sharing its' flow ratio at 220°c?
Customer Reviews
38 English reviews written for 3DJAKE ecoPLA White
358 customer reviews in all languages
5 stars | | 627 | (75%) |
---|---|---|---|
4 stars | | 112 | (13%) |
3 stars | | 32 | (3%) |
2 stars | | 25 | (3%) |
1 Stars | | 36 | (4%) |
832 reviews
38 customer reviews in English
358 customer reviews in all languages
-
Excellent Print Quality, Strong Bed Adhesion, Moderate Diameter Precision
Rated with 5 out of 5 stars.
For the relatively low price, this is a great filament for daily use. It prints great at the specified temperatures and has a good adhesion on the PEI and also on satin rough print sheets.
There is enough pigment in this white filament, to create fully opaque parts even with thin (1mm) features.
Considering its affordable price, this filament is an excellent choice for everyday use. It prints seamlessly at the recommended temperatures, demonstrating strong adhesion on both PEI and satin-textured print surfaces.
The white filament boasts ample pigment, allowing for fully opaque parts even with slender (1mm) features.
The only area that could use improvement is the filament's extrusion precision, which would further enhance print outcomes. While the current extrusion is on par with most manufacturers, a tighter ±0.02 mm tolerance would be ideal.Was this rating helpful? (1) (0)
-
Works well enough with the Bambulab P1S after tweaks
Rated with 4 out of 5 stars.
Had to tweak some settings to get this printing well on the high-speed Bambulab P1S. Turning down the flow ratio (to prevent overextrusion) of the "generic PLA" preset helped a lot. It works, if still slightly sloppily. And with the lack of in-supply filament in Bambu's store this filament'll fill the gap nicely enough.
Was this rating helpful? (0) (0)
-
Best Value and awesome print.
Rated with 5 out of 5 stars.
I used this PLA for the first Time. I did not know what to expect.
Tested a few whites from other makers a few of them gave me issues, one was satisfactory but more expensive then this one.
I did not know what to expect I just tried 3D Jakes ECOPLA and the firstprint of a scanned old Greek sculpture plaque with tones of detail.
Printed on CR6SE with 0.4mm nozzle 210 Deg C for nozzle and 60 deg C for bed, this is a 220 diameter plaque so I used a 3mm brim. No WARPAGE !!!. All other White PLAs I tried before warped with big based prints irrespective of using brims.
The print came out awesome detail an smooth finish in areas that are sculptured to be smooth and texture where applies, a pity that I cannot show it here.
I also must mention the excellent service from 3D JAKE awesome supplier, good prices and fastest delivery !Was this rating helpful? (0) (0)
-
Very easy to work with, consistent results
Rated with 5 out of 5 stars.
I have printed an multi-pentagram shaped christmas star (300,300x25cm) shape twice. Then three months later using the same spool printed a similar shape. They performed very well without any errors or faults happening at all. Printer used is Artillery X1. Extruder temperature was set at 210C and be temperature at 60C. Have printed using this spool six time. and worked beautifully and consistently every single time.
Was this rating helpful? (1) (0)
-
Bad bed adhesion but solution
Rated with 4 out of 5 stars.
The first layer is difficult to stick but there is a working solution (ender 3 v2): reduce the speed to 7 mm/s, temperature at 220 and bed temp at 70.
Rest of the print at 20 mm/s, 215 and 60.
Then it prints out nicely without stringing.Was this rating helpful? (8) (0)
Customers also bought
Related products
Magazine Articles:
Discover 3DJake:
-
Free delivery in Great Britain
from £59.90 -
Free
returns More than 9.050 products
Secure payments
with SLL encryption technology
I wouldn't consider our standard ecoPLA as a PLA+. Beyond plasticisers and dyes there are no further modifications made to it. If you're interested in a non-standard finish on PLA I would suggest looking at our ecoPLA satin range and our ecoPLA Matte range.