35 search results for "hips"
-
Fillamentum HIPS Extrafill Natural, 1.75 mm (750 g)
- High strength
- High heat resistance
- Suitable as a support material
-
Fillamentum HIPS Extrafill Sky Blue, 1.75 mm (750 g)
- High strength
- High heat resistance
- Suitable as support material
-
Fiberlogy HIPS Natural, 1.75 mm (850 g)
- Soluble in D-limonene
- Polishable
- Matte surface
-
Spectrum HIPS-X - Bahama Yellow, 1.75 mm / 1000 g
- High-impact resistance
- Easy to print
- Can be used as a support material for ABS
-
Fillamentum HIPS Extrafill Metallic Grey, 1.75 mm (750 g)
- High strength
- High heat resistance
- Suitable as support material
-
Spectrum HIPS-X - Gypsum White, 1.75 mm / 1000 g
- High-impact resistance
- Easy to print
- Can be used as a support material for ABS
-
Fillamentum HIPS Extrafill Traffic Black, 1.75 mm (750 g)
- High strength
- High heat resistance
- Suitable as support material
-
Fillamentum HIPS Extrafill Signal Red, 1.75 mm (750 g)
- High strength
- High heat resistance
- Suitable as a support material
-
eSUN HIPS Natural, 1.75 mm / 1000 g
- Robust & resistant
- Excellent as a soluble support material
- No residue after dissolving
-
Formfutura EasyFil™ HIPS Natural, 1,75 mm / 750 g
- Impressive finish
- Easy to print
- Easy to process
-
eSUN HIPS Black, 1.75 mm / 1000 g
- Robust & resistant
- Excellent as a soluble support material
- No residue after dissolving
-
Spectrum HIPS-X - Dragon Red, 1.75 mm / 1000 g
- High-impact resistance
- Easy to print
- Can be used as a support material for ABS
-
Spectrum HIPS-X - Deep Black, 1.75 mm / 1000 g
- High-impact resistance
- Easy to print
- Can be used as a support material for ABS
-
Snapmaker Hotend for J1 - Set of 2, 0.2 mm
- For a wide range of materials
- With a silicone cover
- High quality
-
Snapmaker Hotend for Dual Extrusion Module, 0.4 mm Hardened
- For a variety of materials
- Automatic size detection by Luban
- High-quality
-
BondTech CHT Nozzle for Volcano Hotends, 0.4mm
- Nickel plating
- Higher melting capacity
- High hotend compatibility
-
BondTech CHT Coated Nozzle M6 x 1.75 mm, 0.4 mm
- Nickel plated
- Higher melting capacity
- High hotend compatibility
-
BondTech CHT MK8 Coated Nozzle, 0.4 mm
- Nickel plated
- Higher melting capacity
- High hotend compatibility
-
Formfutura Atlas Support™ Natural, 2.85mm (300 g)
- Higher thermal stability
- Ideal for dual extruder
- Cold-water soluble
-
Phaetus XG Brass Nozzles, 0.4mm
- Made from high-quality brass
- High precision & compatibility
- Stable performance & excellent quality
-
BIQU H2 V2S Lite extruder
- Fast & effective heat dissipation
- With a practical lever handle for filament control
- Robust heat break
-
Snapmaker Dual Extrusion Module
- Two materials at the same time
- Multicoloured printing
- Ideal for easily removable support structures
-
AzureFilm PAHT Carbon Fibre, 1.75 mm / 500 g
- High-temperature resistance
- Excellent mechanical properties
- Lightweight
-
Spectrum PET CF15, 1.75mm / 750g
- Temperature & chemical resistant
- Good tribological properties
- Very robust layer adhesion
-
Spectrum PA6 CF15, 1.75mm / 750g
- Low moisture absorption
- High mechanical strength
- High-temperature resistance (up to 180 °C for short periods)
-
Spectrum PA6 CS20 FR VO, 1.75mm / 750g
- High-temperature resistance (briefly up to 160°C)
- Very good layer adhesion
- Low shrinkage
All prices incl. VAT.