Wanhao UV Resin - Water Washable 1000ml
Washable UV resin for your 3D printer
Out of StockOur shop no longer sells this product.
Product information & technical details
- Manufacturers: Wanhao
- Shore Hardness : D75
- Product types: Resin
- Light source: LCD, DLP
Description
The Wanhao Water Washable UV Resin can be washed off with water and is suitable for UV-DLP-3D printers. These printers solidify the liquid resin by exposure to 405nm UV light.
Material properties of the Wanhao resin:
- Can be cleaned with water
- Wavelength of 405 nm
- Fast polymerisation process through an optimised resin
- Designed for use with Wanhao DLP and UV LED 3D printers
- This resin can be processed on almost all DLP and UV LED 3D printers
Tips for optimal 3D printing results
After completion of 3D printing, clean your objects in water or a bath of isopropyl alcohol. Leave your parts in the bath for about 10 minutes, this removes excess resin from your models. Then dry your objects in the air. It is then recommended to cure the model under UV light until the final strength is reached. As a UV light source, you can use UV LEDs or sunlight.
Customer Reviews
1 English review written for Wanhao UV Resin - Water Washable 1000ml
5 customer reviews in all languages
| 5 stars | | 9 | (100%) |
|---|---|---|---|
| 4 stars | | 0 | (0%) |
| 3 stars | | 0 | (0%) |
| 2 stars | | 0 | (0%) |
| 1 Stars | | 0 | (0%) |
9 reviews
1 customer review in English
5 customer reviews in all languages
-
David
10 May 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating.
Customers also bought
Related products
Magazine Articles:
Discover 3DJake:
-
Free delivery in Great Britain
from £59.90 -
Free
returns More than 9.050 products
Secure payments
with SLL encryption technology
Wanhao Water washable - highly recommended!
Rated with 5 out of 5 stars.
This is a thick resin that is very hard when cured. It does need a long exposure. On my Epax X1 I found 15 seconds got a perfect print. Towards the tail end of the bottle I had one failed print where 1/4mm supports didn't not take. I had noted a slight resin thickening, so upped the exposure to 16.5 seconds and finished the bottle. I used 100 second exposures on the first six layers and had good adhesion to the plate. From what I have read, Epax printers have a somewhat higher power UV light than AnyCubic or Ergoo, so do consider that with these numbers.
I have also run the same vat of resin continuously for 36 hours without filtering, with no degradation of the resin and no failed prints.
As for the Water Washable bit, that worked as advertised. A quick swill in a pot of cold tap water for initial clean, then another for final clean is all I needed. It took a couple of minutes in all. Vat cleaning is simple as well. I still give by build plate a wipe with IPA as well as my film, but initial washing is also done in water.
Prints are very hard and inflexible, but very stable. The finish is just like the yellow-cream cast resin that most model accessories are made from. I have printed some large 80mm tiles and, once cured, they would inevitably warp. I put a piece of paper on the back and cooked them with a travel iron. Then I held them flat for a minute to cool and they have stayed true. (I learned this trick with cast resin a long time ago)
A big plus is that the odour is very low. I print in my kitchen and have no room elsewhere. Chemical odour issues did put me off resin printing, but I have no complaints with this resin. You can smell it and I'd still ventilate, but I can go make a sandwich without too much concern when I'm printing!
To summarise: great water washable resin, with the long exposure time being the only downside. I recommend this if you want low odour, less IPA and a very tough resin with great detail.
Was this rating helpful? (6) (0)