BondTech CHT Coated Nozzle M6 x 1.75 mm, 0.4 mm
For high flow applications
£21.00
(Price shown includes 20% VAT. - Excludes delivery costs)
Features & Advantages
- Nickel plated
- Higher melting capacity
- High hotend compatibility
Item no.: BTE-600-C-CHT-MOS-175-40, Content: 1 pc, EAN: 7350011414826
Product information & technical details
- Item no.: BTE-600-C-CHT-MOS-175-40
- Manufacturer No.: 600-C-CHT-MOS-175-40
- Manufacturers: BondTech
- Content: 1 pc
- Product types: Nozzles
- Nozzle shape: V6
- Compatible with 3D Printers : Anycubic i3 Mega, Original Prusa i3 MK2, Original Prusa i3 MK2S, Original Prusa i3 MK2.5, Original Prusa i3 MK3, Original Prusa i3 MK3S, Original Prusa i3 MK2.5S, Anycubic i3 Mega S, Anycubic i3 Mega Zero, Anycubic i3 Mega X, BIQU BX, Anycubic 4max Pro, MINGDA Magician X, MINGDA Magician Max, MINGDA Magician Pro, Anycubic Kobra
- Nozzle Diameter: 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm, 1.0 mm, 1.4 mm, 1.8 mm
- Filament Diameter: 1,75 mm
Description
Advantages of the Bondtech CHT technology
Bondtech CHT nozzles divide the filament into 3 thinner strands, which melts the material from the inside. As a result, the material melts faster and higher flow rates can be selected.
Advantages of nickel plating
A nickel coating is applied to the brass nozzles, which protects against dirt, corrosion, erosion and abrasion.
Nickel-plated nozzles have a higher corrosion resistance and a lower coefficient of friction, which allows a smoother material feed and delays the plastic adhesion to the nozzle surface.
Key Features
- Higher melting capacity
- Affordable price
- Machined with ultra-precision
- Brass nozzle with nickel-plated surface
- Follows the RepRap standard (M6 × 1 × 7.5 × 12.5 1.75)
The CHT nozzle is compatible with the following hotends:
- Mosquito and Mosquito Magnum
- Mosquito Liquid
- Mosquito Magnum +
- Copperhead
- E3D V4, V5 & V6 blocks
- E3D Chimera and Kraken
- RepRap M6
The CHT nozzle can be used with the following materials:
- PLA
- ABS
- HIPS
- PC
- TPU
- TPE
- Nylon
- PETG
- ASA
- PP
- PVA
The use of other nozzles is recommended for technical and abrasive materials.
Product videos:
Questions & Answers about BondTech CHT Coated Nozzle M6 x 1.75 mm
-
Is this compatible with the Biqu H2 V2?
-
Can I use this nozzle with ANYCUBIC Kobra Max?
-
Hi, Will this fit the spider high flow kit for the S1 pro, I bought the high flow kit from her but I got the standard cht nozzle which obviously doesn't fit the spider hot end ,
-
is this nozzle compatible with "Phaetus Dragon" (Standard Flow)(not dragonfly) hotend?
Customer Reviews
8 English reviews written for BondTech CHT Coated Nozzle M6 x 1.75 mm
26 customer reviews in all languages
| 5 stars | | 54 | (83%) |
|---|---|---|---|
| 4 stars | | 5 | (7%) |
| 3 stars | | 3 | (4%) |
| 2 stars | | 2 | (3%) |
| 1 Stars | | 1 | (1%) |
65 reviews
8 customer reviews in English
26 customer reviews in all languages
-
Marc
28 January 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. I purchased a 0.6 and 1.4mm
Rated with 5 out of 5 stars.
At first I wanted to try the 0.6mm nozzle. However, 3djake only had the 1.4 in stock. I knew that my ender 3 v2 with a e3d v6 hot end would be far to small for this nozzle. I was correct. I printed a vase that originally took me on a brass 0.4, 14 hours. It took me 1 hour. Other than spiral/vase mode. I this nozzle is absolutely useless at slow speeds and small prints.
I eventually got a hold of a 0.6mm nozzle. I can print a lot faster without the dreaded clicking from the original extruder. I've since upgraded to a BMG extruder. I can print my test xyz cubes in 15 minutes however, i cannot get my printer dialed in to keep up with the flow and movement speeds. So until I can dial my printer in, i cannot take advantage of the extra flow these nozzle give me.
If you are looking at upgrading to a volcano but are not an expert at setting up a printer. Buy one of these nozzles. You will save money and get the same benefits of a volcano hot end.Was this rating helpful? (2) (0)
-
Thomas
04 July 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Great upgrade
Rated with 5 out of 5 stars.
After 18 months of light use I replaced my stock Prusa nozzle with a 0.4mm CHT. Performance of the old nozzle had seriously degraded till I could only print PETG at 30% speed and got increasingly rough results even in PLA. New nozzle - 150% speed PETG on first go with pristine results! And it can probably go faster still. Very pleased with the upgrade. In fairness I may have got a big improvement with just a new basic brass nozzle, but probably not to this level.
Was this rating helpful? (4) (0)
-
Christian Woznik
10 November 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Unglaublich
Rated with 5 out of 5 stars.
Ich muss sagen, ich war skeptisch. Wie kann eine so geringe Änderung einen solch positiven Effekt haben?
Ich erreiche mit der Düse in 0,6mm nun um die 20mm^3/s in einem ANet ET4 Pro. Und das Problem ist nun der Extruder, der einfach nicht mehr mitkommt.
Deswegen habe ich mir nun auch einen BondTech Extruder zusammen mit einem Slice Engineering Coperhead Heater Block gekauft. Ich bin gespannt, was dann möglich sein wird.
Ein Nachteil gibt es bei dem ET4 Pro. Die Düse hat ein längeres Gewinde als die beiliegenden. Dadurch sitzt entweder der Heatbreak oder die Düse nicht vollständig mehr in dem Heizblock. Bei dem ANet ET4 Pro würde ich definitiv direkt auch eben diesen tauschen um sich unnötige Mühen zu ersparen.Was this rating helpful? (1) (1)
-
Lapjoint
12 November 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Works like a charm
Rated with 5 out of 5 stars.
I used to print bigger parts with a .8 mm nozzle on an E3D Volcano hotend, which I had to swap out for my regular E3D V6. With these nozzles, I can print at the same flow rates and with .8 mm or 1 mm nozzles with just a simple nozzle change, which makes it much, much easier to go back and forth between nozzle sizes. I also got the impression that these ooze a little less than the longer Volcano nozzles.
Beautifully made and well worth the higher price.Was this rating helpful? (9) (0)
-
Janovich
04 October 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Favorite Nozzle
Rated with 5 out of 5 stars.
CNC kitchen channel benchmarked this nozzle and it always came out on top compared to anything else in printing speed, and with a fairly large margin. Its a must have for printing big items fast.
However they are difficult if not nearly impossible to unclog in my experience. Fairly expensive too.Was this rating helpful? (4) (1)
Customers also bought
Related products
Magazine Articles:
Discover 3DJake:
-
Free delivery in Great Britain
from £59.90 -
Free
returns More than 9.050 products
Secure payments
with SLL encryption technology
Yes you can :)