E3D Power Supply
Power supply for RepRap 3D printers
- Replacement power supply.
Product information & technical details
Replacement power supply for RepRap 3D printers
|DC output voltage||12V||24V|
|DC output current||33A||16,5A|
|DC output voltage error||± 1%||± 1%|
|Ripple and noise||150mV||150mV|
|Input current||6.5A / 115V 4A / 230V||6.5A / 115V 4A / 230V|
|AC input voltage range||85-132VAC / 170-264vac 47-63HZ 240-370VDC||85-132VAC / 170-264vac 47-63HZ 240-370VDC|
|Overload protection||105-135% cut off the output auto-recovery||105-135% cut off the output auto-recovery|
|Over-voltage protection||115-135 cut off the output auto-recovery||115-135 cut off the output auto-recovery|
|Weight||1.05 kg||1.05 kg|
There is a voltage selector switch that allows you to configure the power supply to match your national supply voltage. This must be checked and set after receipt of the delivery. The default setting is 220 V, which causes less damage when connected to a 110 V power supply. However, the reverse setting can lead to irreversible damage.
This power supply is aimed at experienced users. If you are not familiar with the cabling in your own network, please consider an alternative power supply. All connections must be isolated to avoid short circuits and electrical shock to people who may be exposed to your printer. Please play it safe!
Questions & Answers about E3D Power Supply
One of the largest 3D printing communities is called Thingiverse (MakerBot). Here, more than 1.000.000 uploads are available.