Extrudr Green-TEC PRO CF Black, 1,75 mm / 5000 g
Carbon fibre-reinforced filament combining the benefits of Green-TEC PRO with 10% carbon fibre in Black
£189.44 £271.00 -30%
(£37.89 / kg, Price shown includes 20% VAT.
Features & Advantages
- 10% carbon fibre
- Excellent mechanical properties
- High heat resistance up to 165 °C
Related products
Product information & technical details
- Item no.: EX-9010241427970
- Content: 5.000 g
- EAN: 9010241427970
- Manufacturer No.: 9010241427970
- Manufacturer: Extrudr
- Diameter: 1,75 mm
- Product type: Carbon Filament
- Color: Black
- RAL colour: RAL 9017
- System: Spool
- Recommended processing temperature: 225 - 250 °C
- Recommended heating temperature: 60 - 70 °C
Description
Extrudr GreenTEC Pro CF is a carbon fibre-reinforced filament containing 10% carbon fibre, with a heat resistance of 165 °C (Vicat A) and high stiffness. Based on GreenTEC Pro, it is designed for lightweight and functional parts that need to withstand heat and mechanical loads. The fibres also create a matt carbon fibre appearance that helps conceal layer lines.
The 10% carbon fibre content significantly increases stiffness and heat resistance. Tiny fibres also protrude from the surface, creating a matt appearance that conceals layer lines. The fibres also stabilise the material, reducing warping and sagging when printing bridges.
Note: Carbon fibres are abrasive and can quickly wear down brass nozzles. Extrudr therefore recommends using a hardened steel or ruby nozzle with a diameter of at least 0.5 mm. Otherwise, the filament is easy to process, with no adhesive or enclosed build chamber required.
Filament Spool Dimensions
Downloads
Legal guarantee & manufacturer details
More information: https://europa.eu/youreurope/guarantees
Similar products
Questions & Answers about Extrudr Green-TEC PRO CF Black
-
Any info on performance when wet? Or percent of moisture absorption until equilibrium?
-
I have seen users complaining about the LOW temperature when this filament softens arount 70 celsius. Extrudr did not say a word about it.
-
do you know what kind of plastic is used? PETG? PLA?
Customer Reviews
3 English reviews written for Extrudr Green-TEC PRO CF Black
25 customer reviews in all languages
| 5 stars | | 37 | (72%) |
|---|---|---|---|
| 4 stars | | 7 | (13%) |
| 3 stars | | 1 | (1%) |
| 2 stars | | 2 | (3%) |
| 1 Stars | | 4 | (7%) |
51 reviews
3 customer reviews in English
25 customer reviews in all languages
-
Rated with 5 out of 5 stars. Surface quality is nuts...
I used this with a 0.6mm Nozzle X at 0.2mm layer height, and I can honestly say that this is the first filament that I have used that I can't see the individual layers... The Matt surface finish of the material is wonderful. Printing on the satin sheet of my MK3S I had no issues what so ever with warping, even on quite large parts, the bed adhesion was great.
This material is really stiff and thus quite brittle, however depending on your application, this likely wont be an issue.
I actually think it is quite a good value too.
final thoughts; if you're looking for a PLA Upgrade for a project where stiffness is key, just do it.Was this rating helpful? (0) (0)
-
Rated with 5 out of 5 stars. Ease of use + stiffness
I don't like regular greentec but this blend is amazing. Very easy to print, no warping, minimal stringing , impressive surface quality and top notch stiffness.
Note, there is very little flex and it is relatively easy to snap (no predictable bend, just snaps). But if you want something that withstands high-ish temperatures, is stiff and easy to print, try it. Watch out the layer orientation if you are aiming at ultra-stiffness.
(my) Print settings: minimal retraction (0.5mm@40mm/s with e3d v6 w/ titan extruder) plus coasting/wiping, watch out the priming of the nozzle after retracts. If you see blobs, reduce priming distance ! (in s3d: extra retract distance= -0,4).
Bed: PEI @ 60C (or less) is enough, 210C for 60mm/s (more to increase layer bonding, less to decrease stringing a little more). Fan enabled (printing with blower-type at 60%).
Prints fine with 0.4mm nozzle, I had no issues.
You can use very little infil because this filament is very stiff, even two perimeters behave like 5-6 on PLA. 1st layer above infil is also excellent, similar to PLA, you don't need a lot of top layers.Was this rating helpful? (30) (0)
-
Rated with 4 out of 5 stars. It's great actually
The only downside I have is that even at 80C you can bend parts with ease. So working temp of 80C is a myth . Otherwise - it's a great filament.
Was this rating helpful? (8) (0)
Popular categories:
Discover 3DJake:
-
Great Britain: Free standard delivery from £69.90
-
Free
returns More than 11.600 products
We deliver worldwide to
more than 40 countries
Carbon filament has a bit more adhesion to it than regular filament because of the tiny fibres that grab on to surfaces. Reducing the bed temp or increasing your z-offset will help. if you're having great difficulty removing it from the buildplate you can put into a freezer for an hour - this contracts the filament and makes it easier to remove.