Fiberthree F3 PA-GF Pro

High-performance polyamide based on PA 6 with additional glass fibres

Out of StockNo longer in production.

Similar products:

AddNorth Adura Cold White
Fiberlogy Nylon PA12 White
R3D Nylon White

Product information & technical details

Manufacturers: Fiberthree
Diameter: 1,75 mm, 2,85 mm
Product types: PA - Nylon Filaments
Filament colour: White
Net weight: 500 g, 1000 g, 2000 g
Recommended processing temperature: 260 - 285 °C
Recommended heating temperature: < 80 °C

Description

F3 PA-GF Pro is a technical filament made of polyamide, which has been specially modified for 3D printing in FFF with additional glass fibres. The glass fibres reduce shrinkage and warping to a high degree.

Material properties

The material shows superior strength while remaining impact resistance with very little tendency to warp and good layer adhesion. Due to the good heat and load resistance, this material is recommended for all high-strength parts. The printed parts show a very attractive surface texture in a matt antique white. It is a very stiff filament that can only break with very tight flex.

In contrast to F3 PA-CF Pro, this material has no conductivity but also a slightly lower strength.

Processing

Wear-resistant nozzles are strongly recommended for processing the material.

The material must be stored dry in order to achieve reliable printing results under all conditions.

English reviews written for Fiberthree F3 PA-GF Pro