Formfutura EasyClean Resin Cleaner, 5.000 ml

EasyClean Resin Cleaner was developed to safely and effectively remove uncured photopolymer 3D printing resin in the range from 385 to 420 nm from SLA, DLP or LCD 3D printing objects. EasyClean is made from organic solvents and is safer and more effective than isopropyl alcohol (IPA). It can be used about three times longer than IPA.

Main features:

• Excellent cleaning properties
• Decomposes resin better than IPA and other solutions
• Leaves no residue, cloudiness or white haze
• No sticky prints
• Compatible with all UV curable resins for SLA, DLP and LCD 3D printing technologies
• Compatible for cleaning with ultrasonic cleaners and wash & cure stations
• No transportation restrictions
• Not classified as dangerous goods by ADR and IATA
• Non-flammable
• Low odour
• Can also be used to clean building boards, resin tanks and other surfaces that come in contact with resins
• Long shelf life up to 24 months

Application

1. Place the printed model in a container filled with EasyClean Resin Cleaner
2. Clean by hand for 10-15 minutes or 5 minutes when using an ultrasonic cleaner
3. Let the printed object dry after cleaning or rinse it with tap water