2 English reviews written for Fiberlogy Impact PLA Graphite
1 customer review in all languages
4,7 out of 5 stars
5 stars | | 4 | (66%) |
---|---|---|---|
4 stars | | 2 | (33%) |
3 stars | | 0 | (0%) |
2 stars | | 0 | (0%) |
1 Stars | | 0 | (0%) |
Filter reviews:
-
-
Glitter
Rated with 4 out of 5 stars.
Nice color with glitter (sparkle) inside. Just a bit less strong than non-glitter PETG filament (which is normal for sparkly filament). Good accuracy. I don't like the spool because you can't lock the filament where you want and its bulky.
Was this rating helpful? (1) (0)
Magazine Articles:
Discover 3DJake:
-
Free delivery in Great Britain
from £59.90 -
Free
returns More than 9.100 products
Secure payments
with SLL encryption technology
Fiberlogy impact PLA
Rated with 5 out of 5 stars.
I really like this filament. Prints fast and clean with a 0.6 nozzle at 240C Hotend and 60C bed. Adhesion good to PEI textured build surface. The properties are great. It is about 50% stiffer than the PET-G I usually use. It is stronger and it has plenty of ductility ( I run out of travel on the 3 point bend test set up I currently use). The down side is temperature resistance. As printed the material softens at 55-60C. But the big plus and the reason really like this material is it anneals well. I take a large pan of water up to 70-80C, take it off the heat and drop the prints in (bare parts no bag). Then just let the water cool to 45C. This gets the temp resistance up 110C and a gives a bit of improvement in mechanic performance. The shrinkage in plane is 1.5-2% and the expansion out of plane is about 1% warpage from the heat treatment was minimal. I am still experimenting with this filament so you may get different results. Give it a try - Happy printing!
Was this rating helpful? (2) (0)