3DJAKE PLA Brown

Care-free printing with brown PLA

Out of StockNo longer in production.

Similar products:

Fillamentum PLA Extrafill Mukha

Product information & technical details

Manufacturers:	3DJAKE

Diameter:	1,75 mm, 2,85 mm
Product types:	PLA Filaments
Filament colour:	Brown
Net weight:	750 g
Recommended heating temperature:	Not required

Description

The PLA filament by 3DJake is an easily printable filament. The PLA has been slightly modified to make it perfect for 3D printing. The filament has a minimum shrinkage factor and does not warp after cooling. PLA is a biocompatible material, which is obtained from renewable natural resources.

PLA is one of the most popular 3D printing materials due to its properties and good printability.

3DJake's PLA filament can be used with almost all FDM 3D printers.

The 3DJake PLA is tougher and less brittle than conventional PLA filaments.

3DJake's PLA has an outstandingly good diameter and roundness tolerance, which is necessary for 3D printing.

3DJake PLA is available in many colours- there's something for everyone!

Thanks to minimal distortion, the filament can be printed without the use of a heating board. However, if you do have a heating board, the setting should be adjusted to between 40-60 °C approximately.

It is recommended to store the filaments in a cool (15-25 ° C) and dry place.

There are no unpleasant odours during printing.

The 3DJake PLA filament is RoHS approved and REACH compliant.