BuildTak 3D Print Surface
For perfect adhesion
£22.00
(Price shown includes 20% VAT. - Excludes delivery costs)
Features & Advantages
- Perfect adhesion
- Optimal bond
- Reusable
- No more distortions
Item no.: BT-BT12X12, Content: 1 pc, EAN: n/a
Product information & technical details
- Item no.: BT-BT12X12
- Manufacturer No.: BT12X12
- Manufacturers: BuildTak
- Content: 1 pc
- Product types: 3D Printer Accessories, Build Surfaces
Description
BuildTak is a thin, durable plastic film that adheres to the printing bed of FDM / FFM 3D printers.
It provides a perfect surface and replaces the traditional blue tape or Kapton tape.
BuildTak consists of high-quality, heat resistant raw materials and allows for clean and easy removal of the component.
The surface of the component BuildTak adheres the component to the surface, minimizing distortions.
BuildTak offers the following advantages:
- Works great with PLA, ABS, Wood, PET, flexible filaments, and more ...
- No pre-treatment required (applying hairspray, etc.)
- Easy installation and clean detachment with no adhesive residue
- BuildTak is very durable
- Optimal bond between print object and surface
The patent heat-resistant composition was developed to withstand the typical temperatures of heated beds (110-125 °C).
More information
When using the BuildTak Print Surface the board must be calibrated again. The components may adhere to the print bed if the distance is not correct. Please find the instructional video below. BuildTak recommends using a nozzle height of about 0.2 to 0.25 mm. If the first layer does not adhere well, gradually reduce the distance.
Once the correct distance is found, you can use the BuildTak printing surface for hundreds of hours.
Downloads
Product videos:
Questions & Answers about BuildTak 3D Print Surface
Customer Reviews
10 English reviews written for BuildTak 3D Print Surface
143 customer reviews in all languages
| 5 stars | | 145 | (60%) |
|---|---|---|---|
| 4 stars | | 49 | (20%) |
| 3 stars | | 22 | (9%) |
| 2 stars | | 8 | (3%) |
| 1 Stars | | 14 | (5%) |
238 reviews
10 customer reviews in English
143 customer reviews in all languages
-
Steve
02 March 2017
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Buildtac
Rated with 1 out of 5 stars.
Not very good model stuck to buildtac to much very hard to remove ended up damaging the buildtac blue tape works much better and models come off the tape easier buildtac is expensive for what it is
Was this rating helpful? (10) (3)
-
Lawrence
26 September 2017
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Review written by Lawrence
Rated with 4 out of 5 stars.
It is a good surface, however including an advertisment for an upgraded product, i.e the removable flexible magnetic surface was a a bit of annoying as I had invested in multiple sheets, a trail sample would have been more conciderate and not felt like a bit of an insult.
Was this rating helpful? (3) (0)
-
cB
24 June 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Works quite well
Rated with 5 out of 5 stars.
It works great for my machine
Was this rating helpful? (3) (0)
-
Oleg
14 October 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Single use
Rated with 1 out of 5 stars.
So I installed it on top of my worn out ultrabase, and calibrated to 0.2mm. as instructed. And this is what I found out.
No, PLA prints don't pop off when cooled down.
No, it isn't durable when you have knock a metal spatula with a hammer just to get the said PLA print off, alongside with some of the buildplate material fused to the first layer. (by the way, it can get scratched if you use a feeler gauge for calibration)
No, it does require pre-treatment in form of a buildplate adhesive as separator(!!!).
And even the latter didn't help when I got to printing PETG. Some parts of the first layer fused with the buildplate permamently.
As a result, surface texture is ruined in a single evening of printing.Was this rating helpful? (3) (1)
-
Ian
18 February 2019
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Review written by Ian
Rated with 5 out of 5 stars.
Excellent
Was this rating helpful? (1) (0)
Customers also bought
Related products
Magazine Articles:
Discover 3DJake:
-
Free delivery in United Kingdom
from £59.90 -
Free
returns -
Delivery in 5 business days.
More than 8.450 products
Because of the Prusa's unique design (like those 2 screws at the back of the bed) it is difficult to get the perfect build surface for it. The Buildtak flexplate has a spring steel sheet with which PEI or textured surface can be attached.