E3D Titan Aqua Mirrored - 3.00 mm
Water-cooled mirrored 2in1 extruder incl.hot end for 3.00 mm filament
- Compact design
- High-temperature performance
- Water cooling
- Modular ecosystem
Product information & technical details
|Filament Diameter:||2,85 mm|
Titan Aqua is a water-cooled 2-in-1 hot end and extruder from E3D. It is quiet, efficient and completely made of metal, so you can print at the highest temperatures. The Titan Aqua was developed together with the water cooling kit for use in warm and heated chambers, in which air cooling is less effective and the heat sink and extruder are cooled effectively at the same time.
Titan Aqua is the first integrated, water-cooled extruder including a hot end. Created by E3D to make professional 3D printing easier for everyone.
Titan Aqua stays cool at high ambient temperatures. It offers excellent thermal performance because both the heat sink and the motor are water-cooled. Aqua was developed for use in warm and heated chambers and enables easy printing of all types of high-strength plastic. The entire system is highly efficient and very quiet.
Compatible with E3D ecosystems.
With the supplied thermistor, the Titan Aqua can easily reach 285 ° C. By exchanging a thermistor for a thermocouple (additional electronics may be required) or PT100, you can reach over 400 ° C. Like its cousin, the Titan Aero, Titan Aqua uses a V6 heat break. This means that the entire hot side is identical to a V6 and can be upgraded with the entire range of high-temperature parts from E3D.
Titan Aqua retains all of the features of a titan extruder, including the idle mechanism, easy filament change, custom hobb with sharp teeth, and precise 3: 1 gear ratio. With thousands of hours of titan printing experience, the design has been optimised for maximum performance.
Easy to use, maximum performance
Water-cooled performance has never been so easy and effective. The compact design maximises filament restriction and sharp heat transfer, both of which are critical to printing precision. Titan Aqua can be assembled independently and then assembled as a unit in your printer.
- Main body
- Sealing plate
- Filament guide
- Drive Gear with Derlin gear
- V6 aluminium heating block
- V6 heatbreak
- V6 brass nozzle
- 1x V6 universal mounting kit
- 2x M5 4 mm push-in elbow fittings
- 2x MR95ZZ bearings
- M3x3 grub screw
- 4 hexagon socket screws M4x15 (for assembly)
- 2x M3xM25 cheese head screws with hexagon socket
- M3x16 socket head cap screws
- Titan idle spring
- NEMA17 engine
- Motor cable
- Thermistor including connection cable
- 30W heating cartridge
- Silicone packing
- Titan idler arm
- V6 silicone socks
- Thermal Compounds
- 100 mm PTFE hose
Questions & Answers about E3D Titan Aqua Mirrored - 3.00 mm
Did you know?
NASA makes pizza using 3D printers for astronauts in space.