Phrozen Sonic Mighty Revo 16K Max

The Phrozen Sonic Mighty Revo 16K MAX is a resin 3D printer with a 14-inch 16K LCD, an actively heated build chamber and a generous 2-litre resin vat. It is designed for reliably printing large models, full batches of wargaming miniatures and demanding engineering resins in fine detail, without recalibrating before every print. From its camera system and exposure settings to its maintenance features, the Revo MAX is built for continuous operation.

16K resolution for large, detailed prints

The 14-inch monochrome display offers 16K resolution (15,104 x 6,230 pixels) with a pixel size of 20 x 26 µm. Anti-aliasing support helps produce smoother angled surfaces and curves. The 302.4 x 161.98 x 300 mm build volume accommodates large individual models or full build plates of smaller miniatures in a single print.

Dual heating for cold rooms and viscous resins

Two fans heat the entire build chamber rather than just the resin vat. The chamber temperature is adjustable between 25 and 40 °C and, according to the manufacturer, reaches 30 °C within 5 minutes. An optional heated resin vat is also available (NOT included), supporting high-viscosity and engineering resins up to 4,000 cP. Temperature monitoring provides early alerts if the temperature deviates from the set value.

Tool-free maintenance

The release film, build plate and LCD can all be replaced without tools. A four-point quick-release system allows the film to be changed in around 3 minutes, without aligning holes or adjusting screws. The display also uses a quick-release mount, so replacing it does not require dismantling the entire printer. A tempered glass cover with an easy-clean coating helps protect the LCD from scratches and makes resin residue quicker to remove.

A clear view from above

A 1080p camera is positioned directly above the printing area, avoiding the blind spots associated with side-mounted cameras. Two UV-free amber LED strips illuminate the chamber without prematurely curing the resin, while AI-assisted colour correction helps the image reflect the model's actual colour.

Protection against resin, dust and printing issues

A Z-axis splash guard keeps the guide rails clean, while a raised catch tray collects leaking resin. A sensor detects and reports print failures and resin residue at an early stage. The airtight lid helps contain odours, keep out dust and reduce operating noise, while an antistatic coating reduces build-up. The angled build plate allows resin to drain more quickly and features a drip holder and a quick-release mechanism with two handles.

Resume printing after a power cut

If power is interrupted, the Revo MAX saves the print progress and can resume the job once power is restored. If a print cannot be resumed, the printer displays the height and layer where it stopped, helping you decide what to do next. Automatic mains voltage switching removes the need for manual adjustment when moving between regions.

Fine-tune exposure settings

A guided four-step calibration process lets you compare multiple exposure times across 2, 4, 6 or 8 zones in a single test print. Once you select your resin, the printer loads its default settings as a starting point. Each zone can then be adjusted individually. This significantly reduces setup time when changing resins or working in variable ambient conditions.

Status display and remote control

A four-colour LED ring shows the printer's status at a glance: ready, printing, preparing or error. You can also start and pause prints through the Phrozen GO app.

Part of a wider workflow

The Revo MAX is designed to work with other Phrozen devices: the Wash Mega S for cleaning complete build plates, the Cure Mega S for evenly post-curing large prints, the Air Purifier Max for odour filtration and a heated resin mixer for preheating and thoroughly mixing resin before printing.

Key benefits at a glance

• 14-inch 16K display with anti-aliasing for fine details on large parts,
• 2-litre resin vat for longer print runs without refilling,
• Dual heating system combining chamber heating with an optional heated resin vat,
• Tool-free replacement of the release film, build plate and LCD,
• Overhead 1080p camera with AI colour correction and UV-free lighting,
• Z-axis splash guard and raised catch tray to contain resin leaks,
• Power-loss recovery and automatic mains voltage switching,
• Guided zonal exposure calibration for quick exposure tests,
• Remote control and management of multiple printers through the Phrozen GO app.

Technical specifications