5 English reviews written for BIQU H2 Extruder
15 customer reviews in all languages
| 5 stars | | 19 | (76%) |
|---|---|---|---|
| 4 stars | | 2 | (8%) |
| 3 stars | | 1 | (4%) |
| 2 stars | | 1 | (4%) |
| 1 Stars | | 2 | (8%) |
Filter reviews:
-
Stanil
14 November 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. -
Paul
28 August 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Avoid
Rated with 1 out of 5 stars.
Due to quality issues its by chance if you get a good or bad one, I unfortunately was the latter, its nothing but trouble - disassembled more than 20 times to remove jam, grease gears make sure then run smoothly only to jam shortly after.
Was this rating helpful? (5) (1)
-
Philip
17 August 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Very good Extruder
Rated with 5 out of 5 stars.
Huge upgrade from the standard Ender 5. Took a while to get configured and tuned but happy with my purchase
Was this rating helpful? (0) (0)
-
Eoin
25 April 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Biqu H2
Rated with 5 out of 5 stars.
Excellencent prouduct. Fast delivery. Great service.
Was this rating helpful? (0) (0)
-
vml
02 April 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Compact and trouble free
Rated with 5 out of 5 stars.
Easy installation with the linked parts. So far tested with PLA, TPU (A82), HIPS, Nylon, PETG. Works with all these materials. I have to wait for the all-metal heat break to test the materials requiring high temperature. First I thought that the lack of idler adjustment screw would cause problems with soft filaments but even the A82 TPU is extruded without problems. The only small downside is that the included heater block does not have the possibility to use a 3mm screw in thermistor.
Was this rating helpful? (3) (0)
Magazine Articles:
-
Great Britain: Free standard delivery from £69.90
-
Free
returns More than 10.450 products
We deliver worldwide to
more than 40 countries
Nice upgrade
Rated with 5 out of 5 stars.
Used this on an Ender 3 V2
The most difficult part was finding the best plate and part cooling, there many to chose from :)
Pros
Very light
High gear ratio
Reliable(after upgrading)
Uses Capricorn XS PTFE tube for the heatbreak, so the safe temperature is around 260 degrees C
High quality thermistor and heater
It has an yellow rubber duck in the box :) (like all BIQU products)
Cons
Although the included hot end assembly looks like a phaetus and is dimensionally accurate, it's not a phaetus dragonfly
The small bolts on the hot end are very weak and when upgrading to a bi-metal heatbreak they stuck. Bought an original phaetus dragonfly hot end, it's heavier but the machining is better
No all metal heatbrake
The included 3010 fan is not enough to cool the extruder,
it could melt even PLA in the extruder... and then it's disassembly time, replaced it with a 4020 fan and no more jams
After upgrading it with a bigger fan(4020), bi-metal heatbreak and stainless steel nozzle the quality of the print is amazing
Settings after calibration:
Retraction distance 0.4mm
Steps: 922
Was this rating helpful? (4) (0)