3DJAKE niceABS Green
Optimized ABS with improved mechanical properties in green colour
Sold outOur shop no longer sells this product.
Related products
Product information & technical details
- Manufacturer: 3DJAKE
- Diameter: 1,75 mm, 2,85 mm
- Product type: ABS Filaments
- Color: Green
- RAL colour: RAL 6018
- System: Spool
- Recommended processing temperature: 235 - 255 °C
- Recommended heating temperature: 80 - 100 °C
Description
3DJake's niceABS is a newly developed next-generation ABS filament. Through a special technology, we have developed an ABS filament with significantly less cracking, near-perfect layer adhesion, reliable bed adhesion (glass, tape and other spray glue) and improved mechanical properties.
These features make niceABS the ultimate ABS replacement. niceABS is for those who are looking for an alternative to normal ABS and need parts with high impact resistance and strength.
Characteristics:
- Also suitable for open build spaces
- Almost no warping
- Excellent adhesion between the layers
- Reliable bedding (glass, tape and other adhesives)
- Improved mechanical properties over normal ABS
- High strength
- Less unpleasant odours than conventional ABS
All niceABS colours are based on the standardized RAL colour system:
niceABS Green - RAL6018
Additional tips about the print settings:
- Material fan: 0-50%
- Flow rate: 100-106%
Additional Information
We recommend keeping the filaments cool (15-25 ° C) and dry.
Each filament spool is sealed. The products, as well as the packaging, are manufactured in Europe.
| Content | Width | Outer diameter | Inner diameter | Weight (empty) |
| 250 g | 44 mm | 140 mm | 51 mm | 108 g |
| 1000g | 75 mm | 200 mm | 52 mm | 240 g |
| 2300g | 103 mm | 300 mm | 51.5 mm | 605 g |
| 4000g | 110 mm | 350 mm | 51.5 mm | 870 g |
| 8000g | 182 mm | 355 mm | 36 mm | 1045 g |
Downloads
We recommend
Customer Reviews
2 English reviews written for 3DJAKE niceABS Green
4 customer reviews in all languages
| 5 stars | | 10 | (83%) |
|---|---|---|---|
| 4 stars | | 1 | (8%) |
| 3 stars | | 1 | (8%) |
| 2 stars | | 0 | (0%) |
| 1 Stars | | 0 | (0%) |
12 reviews
2 customer reviews in English
4 customer reviews in all languages
-
Oli
24 November 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. -
Where was that stuff produced?
Rated with 3 out of 5 stars.
It seems to me this stuff originally was imported from the rainforest. When I opened the filament for a test print it was so wet that I could almost use it as an independent plant hydrating system. After drying for two hours it worked fine for me but then again what's the point of silicone gel in the package if it's already fully drained with water?
Was this rating helpful? (0) (1)
Magazine Articles:
Discover 3DJake:
-
Great Britain: Free standard delivery from £69.90
-
Free
returns More than 10.450 products
We deliver worldwide to
more than 40 countries
Really easy to print
Rated with 5 out of 5 stars.
I had never printed ABS before and wanted to give it a try so I picked up a 250g spool of this in my last order. My Prusa Mini is in an enclosure which I understand is usually required for ABS to avoid warping.
So far it has printed as easily as PLA and I have not needed to do any tweaking to the Generic ABS profile in PrusaSlicer. Its very strong, has a nice clean finish, and does not string much. I noticed some of my top layers, particularly ones not being cooled directly by the fan, have lipped and curled up a little, though I think I can fix this with a tuning.
Was this rating helpful? (0) (0)