7425 search results for "glue-stick-for-ht-filament"
1 - 36 from 7425 items
-
-
Polymaker HT-PLA Black, 1,75 mm / 1000 g
- Heat stability up to 150 °C
- For printing speeds of up to 300 mm/s
- Easy to print like PLA
-
colorFabb LW-PLA-HT White, 1.75mm (750 g)
- Active foam technology
- Significant weight reductions
- High-temperature resistance
-
Polymaker HT-PLA White, 1,75 mm / 1000 g
- Heat stability up to 150 °C
- For printing speeds of up to 300 mm/s
- Easy to print like PLA
-
E3D Revo Nozzle HT, 0.6 mm
- Made of copper
- Chromium nitride coating
- Temperature resistant up to 500 °C
-
The Filament HT-PLA Toolling Red, 1.75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
-
The Filament HT-PLA Tooling Yellow, 1,75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
-
Polymaker HT-PLA Red, 1,75 mm / 1000 g
- Heat stability up to 150 °C
- For printing speeds of up to 300 mm/s
- Easy to print like PLA
-
-
The Filament HT-PLA Vivid Red, 1,75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
-
Polymaker HT-PLA Orange, 1,75 mm / 1000 g
- Heat stability up to 150 °C
- For printing speeds of up to 300 mm/s
- Easy to print like PLA
-
Fiberlogy CPE HT Black, 1,75 mm / 750 g
- Temperature resistant up to 110 °C
- Odourless
- Without BPA, BPS and styrene
-
Polymaker HT-PLA-GF Black, 1,75 mm / 1000 g
- Heat stability up to 150 °C
- Temperature resistance above 110 °C
- For printing speeds of up to 350 mm/s
-
Polymaker HT-PLA Blue, 1,75 mm / 1000 g
- Heat stability up to 150 °C
- For printing speeds of up to 300 mm/s
- Easy to print like PLA
-
Polymaker HT-PLA Green, 1,75 mm / 1000 g
- Heat stability up to 150 °C
- For printing speeds of up to 300 mm/s
- Easy to print like PLA
-
The Filament Refill HT-PLA Vivid Red, 1,75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
-
The Filament HT-PLA Tooling Dark Green, 1.75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
-
The Filament HT-PLA Warm White, 1,75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
-
E3D Revo Nozzle HT-Abrasive, 0.6 mm
- Made of copper and steel
- Chromium nitride coating
- Abrasion resistant up to 500 °C
-
3DJAKE Sponge for Filament Cleaner - Set of 5, 5 pcs
- Easy exchange
- Good cleaning properties
- Special high-density sponge
-
Polymaker HT-PLA-GF Grey, 1,75 mm / 1000 g
- Heat stability up to 150 °C
- Temperature resistance above 110 °C
- For printing speeds of up to 350 mm/s
-
The Filament HT-PLA Tooling Green, 1,75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
-
colorFabb LW-PLA-HT Black, 1.75mm (750 g)
- Active foam technology
- Significant weight reductions
- High-temperature resistance
-
WIKO Super Glue Remover, 20 ml
- Suitable for many materials
- Effective on fresh and cured CA adhesives
- Easy to remove
-
colorFabb HT Dark Grey, 1,75 mm (700 g)
- Low odour
- High strength
- Extremely high temperature resistance
-
The Filament HT-PLA Light Grey, 1,75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
-
Fiberlogy CPE HT Pure Transparent, 1.75 mm / 750 g
- Temperature resistant up to 110 ° C
- Odourless
- Without BPA, BPS and styrene
-
colorFabb LW-PLA-HT Olive, 1.75mm (750 g)
- Active foam technology
- Significant weight reductions
- High-temperature resistance
-
Polymaker HT-PLA-GF White, 1,75 mm / 1000 g
- Heat stability up to 150 °C
- Temperature resistance above 110 °C
- For printing speeds of up to 350 mm/s
-
The Filament ReFill HT-PLA Toolling Red, 1.75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
-
colorFabb LW-PLA-HT Dark Grey, 1.75mm (750 g)
- Active foam technology
- Significant weight reductions
- High-temperature resistance
-
The Filament Refill HT-PLA Tooling Green, 1,75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
-
E3D Revo Nozzle High Flow HT-Abrasive, 1,0 mm
- Copper/hardened steel nozzle with chromium nitride coating
- With non-stick properties
- Increased volumetric flow rate
-
The Filament Refill HT-PLA Light Grey, 1,75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
-
SUNLU Filament Connector
- User-friendly, compact & intuitive
- Advanced temperature control
- Preset temperature settings
-
The Filament Refill HT-PLA Tooling Lime, 1,75 mm / 1000 g
- Semi-matt surface
- Heat resistant up to 150 °C
- High mechanical strength
Magazine Articles:
Discover 3DJake:
-
Great Britain: Free standard delivery from £69.90
-
Free
returns More than 10.400 products
We deliver worldwide to
more than 40 countries
