Yes but you will probably have to design and print a mount for it to fit and edit the firmware too.

Nothing is required for mounting, it is the same size and has screw holes in the same places as the original board but you will need to update the firmware which you can find here: https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V3.0/Marlin There are lots of youtube videos on installations like this one for example: https://youtu.be/4mTL9Y1SxoE

Technically it is possible but it requires some non-standard firmware modifications and also pin rewiring. We would recommend only BTT touchscreens for this board or the standard 12864 LCD with knob for Klipper use.

This can be used with a raspberry pi or any other host device.

14 questions in English for BIGTREETECH SKR Mini E3

26 Questions in different languages

14 questions in English for BIGTREETECH SKR Mini E3

26 Questions in different languages

Buy product

Filter questions and answers:

Is the connectors plug and play for cr10 v3 with bl touch?

This question has not been answered yet.
Will this work with the Ender-3 V3 SE running Klipper? And if so, are there any significant improvments over the stock mainboard? Thanks!

This question has not been answered yet.
I have an Ender 5 pro, will this work with the current screen

This question has not been answered yet.
can this board be used on an old printer that isn't a creality? i want to upgrade my solidoodle4

1 Answer, last answered on 23 March 2023
- Andrew
  
  23 March 2023
  
  Customer Service
  
  Yes but you will probably have to design and print a mount for it to fit and edit the firmware too.
I have an ender 3 Pro and 3 v1. Is it just a straight swap with these boards ?? Is there any good tutorial out there??

1 Answer, last answered on 13 February 2023
- Andrew
  
  13 February 2023
  
  Customer Service
  
  Nothing is required for mounting, it is the same size and has screw holes in the same places as the original board but you will need to update the firmware which you can find here: https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V3.0/Marlin
  
  There are lots of youtube videos on installations like this one for example: https://youtu.be/4mTL9Y1SxoE
Is it compatible eith tft70 ? When connecting it an red led flashes. Thanks

This question has not been answered yet.
Does Creality Sonic Pad work with BTT SKR Mini E3 v3?

This question has not been answered yet.
Could this be used with CR10s Pro V2? The ribbon cable would need to be adapted to separate plugs. I assume screen wouldn't work, I intend to go to Klipper anyway

1 Answer, last answered on 21 November 2022
- Andrew
  
  21 November 2022
  
  Customer Service
  
  Technically it is possible but it requires some non-standard firmware modifications and also pin rewiring. We would recommend only BTT touchscreens for this board or the standard 12864 LCD with knob for Klipper use.
Can you connect a WiFi board to this or a raspberry pi to use the Octoprint WiFi functionality??

1 Answer, last answered on 23 May 2022
- Andrew
  
  23 May 2022
  
  Customer Service
  
  This can be used with a raspberry pi or any other host device.
Hello, I have a cr10s5 and I’m looking to replace the motherboard with a quieter one. Will this one plug straight in and do I need to install firmware? Thank you

This question has not been answered yet.