8 English reviews written for 3DJAKE Color Mix Resin Basic

Rated with 5 out of 5 stars.

I bought some of this, and it worked perfectly with miniatures. Sadly I can't attach pictures here, but you would not find any difference between this and 60e/L resin if you paint over this. I didn't even need to buy any coloring, and I bought this on sale, so it's really good deal for anyone looking for prints, that they are going to paint over. The 3Djake resin is cheaper, since the printing can take a little longer, but even this is a super minor inconvinience.

Was this rating helpful? Yes (13) No (0)

Printing on Elegoo Mars 3

Rated with 4 out of 5 stars.

I bought a bottle of this with my Elegoo Mars 3.
After playing around with the settings, I have gotten to a point, where I start the printer, leave it, and come back to consistant good prints, with very high dimension accuracy..
I am using this without any colors added.


Bottom Layers: 6, Bottom Exposure: 35 seconds. With this, I can generally use the plastic spatula to lift a corner on the raft, and swoop the print off.

Layers 0.05 height: 3,9 seconds
Lift Distance: 6mm
Lift speed: 62mm/m
Retract Speed: 180 mm/m
Wait before print: 2 seconds

Hope this can help someone who needs guidance.

Was this rating helpful? Yes (19) No (0)

Antwerpen

Rated with 5 out of 5 stars.

Good quality product for a fair price

Was this rating helpful? Yes (2) No (0)

Just shake, pour, and print

Rated with 5 out of 5 stars.

My very first experience in the world of 3D resin printing and it was a success; My Photon Mono just started printing and produced a perfect object thanks to this affordable and good quality resin. Thumbs Up !

Was this rating helpful? Yes (3) No (0)

Gets the job done

Rated with 3 out of 5 stars.

I bought the resin with dark grey colouring. The results of my print are just fine after playing around with the print settings, but it is very slow.

My settings on anycubic photon S
# bottom layers: 6-8
bottom layer exposure times: 90-120 sec
Exposure times: 22-24 sec
Layer height: 0.05 mm

With these settings, and proper supports on your print, it should work just fine.

During curing the color looked a bit green, but it turned out grey as advertised in the end. After curing, the model felt a bit sticky, but by the next day, it was no longer sticky and perfect to use.

One of the reasons why I could see someone buy this is because of the properties of the finished material. When cured, the plastic has a tiny bit of give to it, making it not too brittle while still being very strong.

Was this rating helpful? Yes (3) No (1)

It seems I got faulty batch but...

Rated with 4 out of 5 stars.

Bought it few months back at last sale, haven't used until few days ago and it's not been that great. It's been stored in dark closet at room temperature and I also print at room temperature so unfortunately that wasn't the issue:

But it seems I got bad batch. I had to almost double exposure time to get something to print and that wasn't really great.

3DJake contacted me about my issue and offered a refund. I must admit I wasn't expecting that. So although I didn't have success printing with it I got a refund, which they offered without me asking, so it wasn't like "though luck, you're on your own" like on some other big shopping site we all know...

Was this rating helpful? Yes (8) No (0)

transparent yellow colourant and basic resin

Rated with 5 out of 5 stars.

Well, I didn't know what to expect when I tried this resin, I was hoping for a good Resin but had previously been unsure of an unknown Brand and put off by the long dispatch time.
Well, i took the plunge and within a week my resin was at my door and i was able to test it out.
All i was after was a good yellow colouration and I got that and so much more.
The Resin is very easy to mix with the colourant, the printing settings arent awful for a mono SE atleast, the colour was bright and evenly spread throughout the print, i cant tell if it yellows under curing (obviously) but it doesnt dull in vibrancy when cured, it has held an extraordanary amount of detail and seems to actually have more resilient strength than several of the "commonly used " brands. All in all i was very impressed and i will be using this brand again to test some other colours.

Was this rating helpful? Yes (7) No (0)

Very good resin, coloring goes a bit weird.

Rated with 5 out of 5 stars.

I went a bit experimental and did half red, half blue coloring. Even wel shaked the color comes out at first as green, turns solid red in ipa, and cures blue with a hint of reddish purple in thickers parts.
Il try single color next time for good color check.
Printed parts came out amazing on a 4k sonic mini.

Was this rating helpful? Yes (6) No (0)